3M Radial Bristle Discs

Radial Bristle Discs by 3M

Bristle-discs-variety  Bristle Discs

These tools are fabulous for finishing any area that has texture, pattern, hard-to-reach nooks and crannies, deep folds, etc.  I love them for cleaning up stone settings like the basket setting. basket-setting

They will cut grooves into smooth material – if you don’t take care.  For flat, smooth metal, I prefer sanding discs, sandpaper or a belt sander.

Don’t forget to stack the discs.  Stack 3 to 6 on top of one another.

stacking-radial-bristle-discs

Also, don’t forget to have the bristles pointing in the correction direction.  Mine point in a clockwise direction.  If your flex shaft is in reverse, they will be facing the other way.  Why is your flex shaft in reverse, BTW?  I’m just confused!

Mandrel-comparison  You can get differently sized mandrels too!  I have a quick change handpiece so, I like all my mandrels to be 3/32″.  If you don’t care, you can use the 1/8″ mandrels.  Just be sure that the screw fits into your discs!  The 9/16″ and 3/4″ discs have a 1/16″ inch hole and the 1″ disc has a 1/8″ hole.  So exciting!

There are three smaller sizes of radial bristle discs for use with flex shafts, micromotors or Dremels.  The discs come in sizes: 9/16″, 3/4″ and 1″.  I generally use the 3/4″ as an all around size.  The 9/16″ are teeny and I find the 1″ a bit large but, it all depends on what you are using them for and your likes and needs.

Visual comparison of 9/16″, 3/4″ and 1″ Bristle Discs:

Bristle-disc-size-comparison  (Click to zoom in!)

Here’s another chart.  This one shows colors and their associated grits.

3M-Bristle-Disc-Chart

You can also purchase larger discs for your buffing motor.

These discs are great for woodworking and carvers will appreciate their ability to reach into small, recessed areas.

Further Reading